tungsten carbide hot pressing punching dies with long lifetime
Size outer diamter: ∅2-∅380mm
inside diameter: φ1-∅360mm
Bolts&nibs,Nut forming dies,non standard dies
Homogeneous property,good wear resistance ,high impact resistance
Mould and die industry ,such as cold heading dies,powder metallurgy
dies and all kinds of hardware forging dies,etc
Zhuzhou Mingri Tungsten Carbide Co., Ltd. was established in May of
2001 with the investment of RMB 40 million. We have up-to-date
production machine line and a lot of technicians.
Zhuzhou MingRi Cemented carbide co.,ltd is located in the tungsten
carbide hometown , convenient transportation, from changsha airport
just 40 minutes, wuhan just 1.5 hour, from guangzhou just 2 hours.
A favorable peripheral environment for cemented carbide
manufacturing provides a natural barrier. Convenient traffic for
tomorrow's internationalization laid a wide road.
Tungsten carbide pellets are widely used in cold
heading,forging,stamping and punching dies for maufacturing nuts,
screw caps, bolts, cans and many other products.
1, Focusing on manufacturing tungsten carbide products over 19 years.
2, Specialist manufacturer equipped with advanced processing
machines and over160 technicians.
3, Over 50 tons/month productivity to assure sustainable supply of products
4, Owing mould workshop to design & produce moulds for nonstandard products, and with mould
stocks over 10 thousand sets for different products.
5, Full ability to accept OEM & ODM orders.
6, Stringent quality control and quality consistency.
7, Professional mechanical & chemical inspecting labs to control the quality of raw material and inspect physical & mechanical properties of finished products.
|Properties & Applications||Approx Grades in China|
|A||13.5||3000||83.5||Good wear resistance and bending strength. It is often preferrd by
nut forming dies and high impact-resistant dies.||—|
|YM11||14.4||2420||88.5||Forming or stamping dies for metal powders and non-metal powders.||YG11|
|YM15||14.0||2500||87.5||It is suitable for drawing steel tubes and rods under high
compression ratio, manufactuing upsetting, punching and forging
tools under large stress.||YG15|
|YM20||13.5||2800||85.5||It is suitable for manufacturing punching dies for watch parts,
leaf spring of musical instruments, battery jars, small sized steel
balls, screws, screw caps, etc.||YG20|
|ML32||13.9||2750||85.5||It is suitable for impact-resistantance forging dies.||YG16C|
|ML36||13.7||2800||84.5||It is suitable for impact-resistant forging dies, hot-forging dies
and finishing rollers.||YG18C|
|ML40||13.5||2850||83.5||It is suitable for wear resistant or impact resistant dies.||YG20C ZL40.2|
|ML50||13.3||2900||83.0||It is suitable for nut forming dies and high impact-resistantance
dies. ||YG22C ZL40.5|
|ML60||13.1||2950||82.5||It is suitable for stainless screw dies and semifinishing rollers.||YG25C ZL40B|
|ML100||13.1||3050||83.4||It is suitable for screw cap forming dies with high strength (
highest impact-resistant forging dies).||YG25C GT55|
|Other grades of cemented carbide blanks for cold-forging dies may
be offered by customers' requirements|
Including but not limited to the following types.
Why choose us?
1.Zhuzhou Mingri has the richest molds stock of all kinds of cold
and hot punching dies.
2.With stable relationship with our customers.
3.The most advanced tooling warehouse.
4.The largest production capacity and fastest delivery .
5.The most reliable testing machines for all specifications.
6.The best and reliable after service.
Feel free to contact me if any needs:
zhuzhou mingri cemented carbide co. ltd